GIA & AGS Certification
All reputable jewellers diamond jewellery and solitaire diamonds products are accompanied by genuine and valid certificate from an Independent international labs attesting to the quality of the stone used. The certification is an assurance of the quality of the diamond.
The most famous are certifications from GIA (Gemological Institute of America) and AGS (American Gem Society Laboratories).
An authentic report from the best and reputable labs is the best assurance anyone can give you with regard to the quality and purity of the jewellery and stones used.
It is recommended that you understand various certification grades as they define the stone you are planning to buy.
GIA Known to be one of the best certifications, GIA's (Gemological Institute of America) grading reports contain every single detail about the diamond you purchase. It grades every single detail of the anatomy of the diamond therefore making it easy to buy the stone. A not for profit organisation, GIA was established in 1931.
AGS yet another standard, American Gem Society Laboratories certifies diamonds based of the characters of the diamond. Grading the 4Cs of the diamond, grading them, also makes this certificate a highly acknowledged one.
How To Read A Certificate
Date: While reading a certificate, it is always good to check the date of certification first. If the certificate is old, the diamond would have gone through many changes and therefore would require to be certified again.
Certification number: This is also an important factor. This is a unique number given to the diamond. In most cases, this number is engraved in the diamond's girdle. The number of the certificate must match the number on the girdle.
Usually, the certificate will provide an ideal measurement for reference and the actual measurements of the diamond. It is always good to pick diamonds which are in closer range to the ideal measurements given in the certification.
The certificates also contain details about the diamond such as, inclusions, symmetry and polish.
If there are inclusions, the certificate will provide details of the inclusions as well.
It also provides details on flourescence. Some provide the level of flourescence also.
GIA Certification In Evaluating Diamonds
We recommend every buyer only purchase a diamond with a GIA or AGS Certificate. The GIA is the most respected and most consistent of all of the grading entities. In addition to a GIA or AGS certificate, be sure to purchase a diamond from a reputable jeweller.
History Of GIA
Robert M. Shipley, a successful jeweller in the 1920s, noticed a lack of expertise in the jewellery trade. With a desire to bring trust to the industry, he completed the Great Britain National Association of Goldsmiths gemological course. Then, he launched his own gemology course to certify jewellers. He also started a jewellers' guild.
In 1931, the first GIA gemological laboratory was established, creating standards for evaluating gemstones. As a nonprofit organization, the GIA offers gemology and jewellery research and education, along with grading gemstones worldwide. The GIA is based out of Carlsbad, California with office locations in 13 countries.
The GIA is the respected entity when it comes to diamond and jewellery grading and certificates. They're the most consistent lab in the business.
GIA Diamond Grading Report
As an independent grading entity, the GIA has no stake in the sale of a diamond. They evaluate each gemstone based on various qualities and components.
Grading Results and Scales
The 4Cs of a diamond (cut, color, clarity and carat) represent the four main components of its beauty and structure. Each C is graded on a scale. The gradings help determine the value of a diamond and indicate its quality.
Diamond cut refers to the quality of a diamond's proportions, angles, symmetrical facets, fire, brilliance, scintillation and finishing details.
The GIA grades cut on the scale of Ideal, Excellent, Very Good, Good, Fair and Poor. The Ideal and Excellent grades, depending on diamond shape, signify proportions and angles cut for maximum brilliance and fire.
A top grade designation, like Excellent, doesn't necessarily indicate an outstanding diamond cut. Almost 55% of all diamonds sold online are Excellent cuts. Some are mediocre, while others are stunning. Because cut is so important to a diamond's fundamental beauty, it's crucial to review cut carefully and ask for the eye of an expert.
A diamond is graded on how white or colorless it is. The GIA grades diamonds from D to Z, with D being the most colorless and Z containing noticeable yellow or brown.
In most cases, the naked eye is unable to tell the difference between two adjacent graded diamonds, though the price difference may be significant. While it's important to know the GIA color grade of a diamond, the most important aspect is to determine if the diamond looks colorless to the naked eye in relation to its setting.
Note: Diamonds with a distinguished color, like a fancy green or pink diamond, are valued stones. Grades for these diamonds are distinct from those given to traditional "white" diamonds.
Clarity grade dictates how clean a diamond is from blemishes and inclusions. The GIA grades clarity on the following scale:
||Flawless: No inclusions under 10x. A stone that is completely flawless. This is an extremely rare find.
||Internally Flawless: No internal imperfections. A stone that has no internal flaws at all but does have surface flaws. Also, an extremely rare find.
||Very Very Slightly Included: A stone with very minute internal inclusions that are extremely difficult to see under a 10X magnification.
||Very Slightly Included: A stone with very minor internal inclusions that range from difficult to somehwat easy see under a 10X magnification.
||Slightly Included: A stone that has imperfections visible under X10 magnification and may be visible with the unaided eye.
||Included: A stone that has significant inclusions most often visible with the naked eye. Inclusions of this level drastically bring down the diamonds value.
When it comes to clarity, we recommend finding a diamond that is eye-clean, so inclusions do not interfere with light reflection.
Carat doesn't refer to the size of a diamond, but the weight of it. A 1 carat diamond equals 200 milligrams, or 0.2 grams. Depending on diamond shape and how the stone is cut, two 1 carat diamonds can actually be quite different in size.
While carat weight must be considered, the overall appearance and beauty of a diamond should carry more importance.
In addition to the 4Cs, a GIA report provides information about the depth, width and table size of a diamond.
Diamond Characteristics and Structure.
Diamond Table Percentage
Diamond table % is calculated by dividing the width of the table (top surface area) by the width (diameter) of the stone. If the table facet is 4mm wide, and the diamond is 5mm wide, the table % is 80%. The ideal table % largely depends on the diamond's shape.
A diamond's width is the length from one end of its girdle (the diameter at its widest point) to the other end of the girdle. The width is most important when it comes to determining length to width ratio, which demonstrates how proportionate a diamond is.
Depth % refers to the height of the diamond from the culet to the top of the table. Depth % is calculated by dividing the depth by the width and is measured in millimeters and percentage. For example, if a diamond is 4 mm in depth and 4.5 mm in width, the depth percentage is 88.8%.
A lower depth % of two equal carat diamonds usually appears larger due to increased width. A depth % that is too low, though, can create a darker appearance because the diamond will not reflect light as well.
Additional Grading Information
A GIA report will include further details, like clarity characteristics, polish, symmetry and fluorescence.
While these aspects do play a role in the quality of a diamond, they are not the larger components to consider when making your purchase decision.
How GIA Certification Impacts Cost
Even though the GIA is the gold standard in the lab grading world, a diamond with a GIA certificate doesn't necessarily mean it's more expensive.
Because the GIA is consistent and grades diamonds more rigidly than other labs, though, a diamond with a certificate from an entity other than GIA might appear as a better deal. The GIA certificate, however, is far more valid and reflects the true value and beauty of a diamond. Overall, it is best not to compare prices by two equally graded diamonds from different entities.
Advantages Of GIA Certification
• The most well respected diamond grading entity.
• The most consistent grading entity.
• Long history in the diamond industry.
• Rigorous grading (ensuring the diamond is what the certificate says it is).
Disadvantages of GIA Certification
• Not a flawless lab entity, although it comes the closest.
Unique Reports And Additional Services
In addition to the standard grading report for a diamond, the GIA offers the following:
• FOCUS Reports.
• Colored diamond certificates.
• Colored stone certificates.
• Synthetic diamond reports.
• Pearl certificates.
No matter your location, you can submit diamonds and colored gemstones directly to any GIA lab location worldwide for quality service and consistent grading.
When looking at a GIA graded diamond, what remains most important is how the diamond appears to the naked eye.
AGS Certification In Evaluating Diamonds
The AGS has established itself as a top tier diamond grading organization. As one of the most reliable and reputable lab grading entities, we recommend buyers seek an AGS certified diamond (or a GIA certified diamond). When choosing an AGS diamond, be sure to buy from a high quality diamond jeweller.
History Of AGS
In 1934, a small group of jewellers who wanted to protect buyers from false advertising and fraud in the diamond industry established the American Gem Society (AGS). They were the first organization to release a diamond cut grading system when they did so in 1966.
Today, the AGS provides retailers, jewellers and individuals with gemological knowledge, research, consumer protection and standard grading of diamonds. With clear and consistent grading, the AGS is one of the most trusted lab grading entities in the world.
AGS Diamond Grading Report
As a non-profit independent grading entity, the AGS has no stake in the sale of a diamond. The AGS evaluates each diamond based on its qualities and components.
Grading Results and Scales
A diamond;s 4Cs (cut, color, clarity and carat) represent the four main components of its structure and beauty. AGS grades each C on a scale helping to determine the value of a diamond and its level of quality.
Diamond cut grade indicates the quality of a diamond's angles, proportions, symmetrical facets, brilliance, fire, scintillation and finishing details.
Cut is graded differently by the AGS than other labs like the GIA. The AGS assigns a number along with a descriptive word grading.
The GIA grades Cut on the scale of Ideal, Excellent, Very Good, Good, Fair and Poor. The Ideal and Excellent grades, depending on diamond shape, signify proportions and angles cut for maximum brilliance and fire.
The AGS Cut Scale is as follows from 0 to 9, 0 being Ideal and 10 meaning Poor:
The Ideal and Excellent grades, depending on Shape, demonstrate proportions and angles cut for maximum fire and brilliance.
It's important to know that a top designation, like Excellent, doesn't always indicate an outstanding diamond. Almost 55% of diamonds sold online are graded as Excellent cuts. Some are mediocre, while others are stunning.
Because cut is critical to a diamond's beauty, it's necessary to review cut quality and ask for an expert's opinion.
Color grade determines how white or colorless a diamond is. AGS grades diamonds on the following color scale, from 0 to 10 (with 0 being the most colorless and 10 denoting noticeable yellow or brown tint).
The chart below shows how the AGS and GIA color grades overlap with each other. If you are comparing two diamonds, one certified by GIA and one by AGS, you'll be able to compare their colors using this chart.
In almost all cases, the naked eye is unable to distinguish two adjacently color graded diamonds, although the price difference may be significant. The color grade given by AGS helps identify the quality of the diamond's color, yet it's still important to determine if the diamond appears colorless to your own eye without magnification.
Note: Fancy diamonds, like a purple or blue diamond, are valued gemstones.
Their color grades are different than those of traditional "white" diamonds.
Similar to cut and color, AGS grades clarity on a 10-point scale. Clarity grade refers to how clean a diamond is from inclusions and blemishes.
For clarity, we recommend looking for a diamond that is eye-clean.
The weight of a diamond, not its size, is what carat refers to. For perspective, a 1 carat diamond equals 200 milligrams or 0.2 grams. Two 1 carat diamonds can be quite different in size, depending on diamond dhape and how the gemstone is cut.
The overall beauty of a diamond should carry more importance than carat weight when deciding which diamond to purchase.
In addition to the 4Cs, an AGS report provides information about the width, depth and table size of a diamond.
Diamond Table Percentage
To calculate the diamond table %, the width of the table (top surface area) is divided by its width (diameter). If the table facet is 3.5 mm wide, and the diamond is 5 mm wide, the table % is 70%. An ideal table % depends on the diamond's shape.
A diamond's width is measured as the length from one end of its girdle (the diameter at its widest point) to the other end of the girdle. Width is important when it comes to calculating a diamond's length to width ratio, which determines how proportionate the stone is.
The height of the diamond from the culet to the top of the table is considered the depth %. The depth % is calculated by dividing the depth by the width. This measurement is reported in millimeters and percentage. For instance, a diamond of 4mm in depth and 4.5 mm in width would have a depth percentage of 88.8%.
A lower depth % of two equal carat diamonds usually appears larger due to increased width. A depth % that is too low, though, can create a dark appearance as it will not reflect light very well.
Additional Grading Information
In addition to the 4Cs and proportions, an AGS report includes further details, like finish, polish, symmetry and fluorescence.
These aspects impact a diamond;s beauty, but they are not the most important components to consider when making a decision.
How AGS Certification Impacts Cost
The fact that a diamond has or doesn't have an AGS certification does not make the gemstone more expensive. The AGS is an independent grading entity and does not have a stake in the sale of a diamond. Diamonds certified by the AGS sell at similar prices to their GIA equivalents. Generally, the AGS is one half of a Color and Clarity upgrade from the GIA. An AGS certification is one of the best measures to ensure you purchase a diamond that is as it reports.
Advantages of AGS Certification
• Highly respected certification.
• Offers consistent and reliable grading.
• Ensures you;re receiving the diamond quality that the certificate states.
• Provides six security measures to help ensure authenticity.
Disadvantages of AGS Certification
• Slightly looser than GIA grading (typically one half a grade in color and clarity).
Unique Reports And Additional Services
In addition to evaluating diamonds, the AGS provides:
• Education on jewellery and gemstones.
• Various diamond report options.
• Laser inscription.
• Diamond sorting.
We strongly recommend looking for a diamond that is AGS or GIA Certified. We also encourage purchasing a diamond only from a reputable jeweller.